User manual

This is the fifth page in the XOVER module. This page is for editing the HIGH
PASS filter on the “High Outputs”.
This GRAPH shows
you how the
crossover points are
set a at a glance.
This shows which
OUTPUTS you are
editing.
H=”Highs”
This is the crossover
point which is edited
on this page.
This is the OUTPUT
GAIN for the high
outputs.
This is the crossover
FREQUENCY for the
high pass on the high
outputs.
This is the filter
type and slope
selected for the high
pass filter for the high
outputs.
Back To X-Over Prev Slide
Xover (Crossover)
Index
54