User manual

ManualsBrandsCrown ManualsAmplifierXS900

Editing Functions

Section 2

DriveRack

The DriveRack

PA has been carefully designed and engineered to ensure that all aspects of

operation are intuitive and logical. Simply stated, the DriveRack

PA operating system was

designed with user’s best interest in mind.

Navigational aspects of the DriveRack

PA are clear, concise and more important: flexible. The

DriveRack

PA provides you with essentially three different modes of navigation when per-

forming program edits.

1. FX buttons - This array of 12 FX buttons is your primary mode of

directly accessing any effect module.

2. NEXTPG & PREVPG page buttons - Successive

presses of the NEXTPG or PREVPG page buttons will move the user from one page to the

next in an effect block. 3. Data Wheel - The Data Wheel is used to move through the pro-

gram menu of the DriveRack

PA. The Data wheel is also used to change the values of the

selected parameter by simply rotating the wheel. Pressing the Data wheel will toggle between

the available parameters on any selected page of the currently selected effect module.

PREVIOUS PAGE - Moves to the previous page in the currently selected

effect menu.

NEXT PAGE - Moves to the next page in the currently selected effect menu.

EQ - Selects the EQ effect menu. This is the EQ section located prior to the

crossover section. Successive presses will rotate through the various pre-

crossover 28 band EQ and Post-xover PEQ section modules.

SUBHARMONIC - Selects the Subharmonic Synthesizer section.

XOVER - Selects the Crossover section.

FEEDBACK - Selects the Advanced Feedback Suppression (AFS) effect section.

COMP/LIMITER - Selects the Compressor and the Limiter effect section.

Successive presses will move from the Compressor (pre-xover) to the Limiter (post-

xover).

DELAY - Selects the Alignment Delay effect module.

OGRAM

This button is used to enter the Pr

ogram screen from any sub

section within the unit when pr

essed.

UTILITY - Selects the Utility menu of the DriveRack PA.

ORE

- The stor

e button is used to stor

e pr

ogram edits.

WIZARD - Enters the DriveRack P

A W

izard setup menu which includes:

System Setup, Auto EQ setup and AFS W

izard.

CROSSOVER/ALIGNMENT DELAY/GRAPHIC EQ/PARAMETRIC EQ/AUTO/EQ

ROSSOVER/ALIGNMENT DELAY/GRAPHIC EQ/PARAMETRIC EQ/AUTO/EQ

CROSSOVER/ALIGNMENT DELAY/GRAPHIC EQ/PARAMETRIC EQ/AUTO/EQ

2.2 FX Button Array Overview

2.1 Basic Navigation Modes

Editing

Functions

DriveRack

PA User Manual