User manual

Application Guide

Section 5

DriveRack

This Application guide section is provided to offer suggested installation applications of the

DriveRack

PA that will allow you to optimize peak performance of the units. Note that the 25

included application programs represent the extensive flexibility of the DriveRack

units. These

pplications can be used verbatim, or as sample reference guide templates for designing count-

less audio applications.

Hardware

1. Connect the outputs from the mixer to the inputs of the DriveRack

2. Connect the outputs of the DriveRack

PA and run to the selected speaker amplifier.

3. Make sure that the mixer and power amps are turned off prior to powering up the

DriveRack

PA.

Software

1. From Program mode, select factory program #F10 (SR4702 2X6) as a template, or use the

Wizard to setup the specific program.

2. Once the program has been chosen, press the DATA wheel to load the program.

5.1 2X6 Crossover

DriveRack

PA User Manual

SR4731XF

SR4719X

A-5002VZ

A-3600VZ

MA-1202

Left

Right

Left Mid

Right Mid

Left Sub

Right Sub

Left High

Right High

Left Low

Right Low

12021202

Left Mid

Left High

Right Mid

Right High