User manual

Application Guide

Section 5

DriveRack

PA User Manual

Hardware

1. Connect the outputs from the mixer to the inputs of the DriveRack

2. Connect the outputs of the DriveRack

PA and run to the selected speaker amplifier.

3. Make sure that the mixer and power amps are turned off prior to powering up the

DriveRack

PA.

Software

1. Use the Wizard to setup the specific program.

2. Once the program has been chosen, press the DATA wheel to load the program.

5.4 - 2X3 Crossover

Left

Right

Mono Low

Left High

Right High

MP4718S

Non-Powered

EON15 G2EON15 G2