User manual

This displays which
OUTPUT you have
selected.
This displays which
BAND is selected.
This is
“FREQUENCY 1”.
This GRAPH shows
the PEQ curve when
the EQ is set.
Here you can
change the GAIN
(boost or cut) of
band 1.
This is the second page in the PEQ (Parametric EQ) module.
Here you can adjust the “SLOPE” or
“Q” of the filter depending upon what
you selected on the first page.
“S”= Slope “Q”=Width
Prev Slide Next Page
PEQ (Parametric EQ)
Index
28