Installation Guide

KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Please follow these fixing and care instructions to ensure your product is fitted safely and
retains its high quality finish. Please retain the leaflet for future reference .
Safety and Care Advice :
- Always take care when using power tools, particularly in the bathroom.
- Always check for hidden cables and pipework before drilling and take extreme care
if there is any water in the working area.
- It is advisable to use a residual current circuit breaker (RCCB).
- Always wear suitable eye protection when drilling.
- Always ensure that the drill hole passes through the central tiled area rather than
- If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used.
- Do not strike the product with hard or sharp objects.
- Do not position glass products directly above a heat source.
through the grouted area. To prevent damage to the tile, mask the area around the hole
with tape before drilling.
Additional Information :
- Maximum safe working load for the shelf is 2kg evenly distributed.
- Wall brackets can be removed by twisting the bracket in an anti-clockwise direction.
- Adhesive residue can be removed by carefully scraping the wall surface with a blunt instrument.
Fixing Pack Contents / Tools required
THESE ARE SUPPLIED
WMA 058 R05
- The adhesive is suitable for use on most flat finished surfaces, such as gloss paint, tiles,
- Do not use on decorative wall paper finishes.
- Not suitable for unfinished materials such as brick, blockwork and loose, flaky surfaces.
Important Adhesive Information :
polished stone, laminates and textured surfaces.
- Redecoration may be required on some painted surfaces after removal.