Installation Guide

40mm
Drill holes
Secure product to Flexi Fix wall
plate by tightening the grub
screw underneath.
BRACKET CENTRES
Towel rail adjustment
BRACKET CENTRES
Shelf adjustment
i
CAUTION!
SLIDE BRACKETS CAREFULLY
TO AVOID SCRATCHING
DO NOT OVERTIGHTEN
i
TIP!
To ensure the towel
rail and shelf are
horizontal, mark
the wall using one
wall plate and
use a spirit level
of the other using
the recommended
wall plate centre
guides.
to find the position
RECOMMENDED TOWEL
RAIL WALL PLATE CENTRES
RECOMMENDED SHELF
WALL PLATE CENTRES
i
CHECK
LEVEL
440mm
600mm
NOTE
Wall plugs supplied
are suitable for a
solid wall fixing
specialist fixings
only.
For cavity walls or
plasterboard use
available from all
good DIY stores.
TIP!
To help line up
and fix the towel
rail and shelf
brackets to the
wall plates, loosen
the grub screws
on the underside
of each pillar and
adjust width as
necessary.
WHEN DRILLING NEW HOLES
Using a pencil mark the
screw hole centres for
the wall plates 30mm
apart.
30mm
Centres
B
WMA 058 R05
wall plates tightly into
Insert wall plugs into the wall and fix the
position using the
screws supplied.