Installation Guide

Thank you for purchasing this Croydex product. Please follow the fixing and care instructions to
ensure that your bathroom product is fitted safely and that it retains its high quality finish. Please
retain this leaflet for future reference.
This instruction leaflet applies to the following products:
WC600122 MAINE ONE DOOR CABINET
Fixing Pack Contents
2 x Fixing Screws
2 x Wall Plugs
2 x Cup Washers
Tools Required
Drill; 6mm Masonry Drill Bit; 6mm Ceramic Drill Bit (optional); Cross Head Screwdriver;
Spirit Level; Bradawl; Pencil.
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Home Safety Advice
It is recommended that two people fit the cabinet to ensure that it is fitted safely.
Always take care when using an electric drill, particularly in the bathroom. Always check for
hidden cables and pipe work before drilling and take extreme care if there is any water in the
working area.
It is advisable to use a residual current circuit breaker (RCCB).
Always wear suitable eye protection when drilling.
If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used. Always
ensure that the drill hole passes through the central tiled area rather than through the grouted
area. To prevent unnecessary damage to the tile, mask the area around the hole with tape
before drilling.
Do not strike the product with hard or sharp objects.
Do not overload the cabinet. Maximum safe working load is 10kg evenly distributed if mounted
on to a solid wall. If mounted on to a cavity wall reduce the load to 5kg evenly distributed.