User`s manual

1
FUNCTIONS & FEATURES
Big LCD which displays frequency and all kinds of information
1.
DUAL-DIGITAL TUBE FOR CHANNEL DISPLAY
2.
USE EL technology for backlight
3.
PA
4.
、
CW
、
AM
、
FM
、
USB
、
LSB mode
A
5.
、
B
、
C
、
D
、
E
、
F , 6 bands in total, with 60 channels at most in
each band to be programmed.
Frequency Tuning Step can be 10HZ, 100HZ, 1KHZ or 10KHZ.
6.
Multiple CLARIFIER Operating Modes
7.
Flexible menu functions and PC programming software to meet
8.
varied customer demands
ECHO Function
9.
SQ, ASQ Function (FM and AM mode only)
10.
RF GANI ADJUSTMENT
11.
RF PWR ADJUSTMENT
12.
SCAN FUNCTION
13.
RB FUNCTION
14.
NB/ANL FUNCTION
15.
DW DUAL-WATCH FUNCTION
16.
BEEP VOICE PROMPT
17.
+10KHZ Function
18.
SWR
19.
、
S/RF
、
DC Voltage display function
TOT function
20.
HI-CUT FUNCTION
21.
EMG CALL
22.
SWR PROTECTION
23.
POWER SUPPLIED VOLTAGE PROTACTION
24.
Key-Lock Function
25.
WARNIGN
To use the radio, please connect the antenna to the location "B" on the
back panel of the equipment firstly and then set the SWR (Standing
Wave Ratio) before transmitting. Failure to do so may result in
destruction of the power amplier, which is not covered by the guarantee.
RESET FUNCTION (Resume Factory Default)
This CB Radio introduces RESET FUNCTION to prevent accidents
and provide a solution for customers who changed some functions
unconsciously and do not know how to resume normal settings. The CB
Radio will resume factory default once this function is activated.
How to Operate:
Step 1: Power off the radio.
Step 2: Press and hold FUNC and SCAN keys at the same time,
followed by powering on the radio.
Step3: Release the two keys when LCD displays "RES".
All former settings would be replaced by Factory Default value when
LCD displays "REND" .
WARNING: All former settings would be replaced by Factory Default
value after operating the RESET FUNCTION.
GAIN