Datasheet

Rugged, Reliable, Mobile, Secure

1-800-260-9800 www.CRU-DataPort.com

DataPort 2 and 4 Bay Enclosure

Install Guide

The DataPort 2 & 4 Bay Enclosures include the following pieces.

If any items are missing or damaged please contact CRU for a

replacement.

4 Bay Enclosure Package Contents

1 - External Enclosure

1 - U320 LVD Terminator

1 - External U320 VHD to UVHD Cable

4 - Hard Drive Mounting Rails

1 - Installation Guide

2 Bay Enclosure Package Contents

1 - External Enclosure

1 - U320 LVD Terminator

1 - External U320 VHD to UVHD Cable

2 - Hard Drive Mounting Rails

1 - Installation Guide

Enclosure Set Up

1. Remove the cover of the DataPort Enclosure. Remove the rear

screws and slide the cover off the back of the enclosure.

2. Remove the front bezels if you are installing a device that

needs external access such as a tape back up unit or CD-ROM.

The DataPort 2 and 4 Bay SCSI Enclosures allow external SCSI devices to be easily

added to any system with an available external SCSI channel. The DataPort Enclo-

sures can provide additional tape backup units, CD-ROMs or non-removable hard

drives to a server. The DataPort 2 and 4 Bay Enclosures will support most full height

SCSI tape backup units. For adding removable DataPort hard drives please contact

CRU at www.CRU-DataPort.com.

3. Set the SCSI ID on the device or remove the jumpers and use

the provided SCSI ID selector switch. Do not use SCSI ID #7, it

is used by SCSI Host Bus Adapters.

4. Install the hard drive mounting kits and secure them with the

provided screws. Otherwise install the SCSI device into the

enclosure and secure them with the provided screws.

5. Connect the data and power cables to the back of the SCSI

devices. If needed connect the SCSI ID selector switches.

6. Slide the cover back on and secure it with the screws.

7. Connect the external power cable, the SCSI cable and

Terminator.

Your enclosure is now setup and ready for use.

PAGE 1
Rugged, Reliable, Mobile, Secure TM DataPort 2 and 4 Bay Enclosure Install Guide The DataPort 2 and 4 Bay SCSI Enclosures allow external SCSI devices to be easily added to any system with an available external SCSI channel. The DataPort Enclosures can provide additional tape backup units, CD-ROMs or non-removable hard drives to a server. The DataPort 2 and 4 Bay Enclosures will support most full height SCSI tape backup units. For adding removable DataPort hard drives please contact CRU at www.
PAGE 2
Rugged, Reliable, Mobile, Secure TM Operation Product Warranty For best results, power on your SCSI Enclosure before powering on your computer system. The power switch is located on the bottom front of the enclosure. CRU-DataPort (CRU) warrants the DataPort 2 & 4 bay enclosure to be free of significant defects in material and workmanship for a period of one year from the original date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.