Datasheet
Protecting Your
Digital Assets
™
Protecting Your
Digital Assets
™
CRU DataPort
®
25 with 6G Enclosure
Thank you for purchasing CRU’s DataPort 25 with 6G enclosure. The DataPort
25 with 6G enclosure is a removable storage device that ts within a standard
3.5” oppy bay and supports 2.5-inch SAS hard drives and 2.5-inch SATA
Revision 3.0 compliant hard drives. It provides easy removability and
portability of your hard drive from a host computer or external storage device.
Carriers that support one 2.5” SAS drive or two 2.5” SATA drives may be used
interchangeably with any existing DataPort 25 frame that supports SAS or
SATA hard drives.
Features
• Supports 6Gbps transfer speeds
• Backwards compatible with 2.5” SATA drives that support SATA
3Gbps transfer speeds
• Fits any standard 3.5” oppy drive
• Universal frame supports both SAS and SATA removable drive
carriers
• Heavy-duty stainless steel construction
• Dual-drive feature supports RAID-1 mirroring and RAID-0 striping
• Retractable push-button eject mechanism
DataPort is a trademark of CRU Acquisitions Group, LLC. Other marks are the property of their respective owners. © 2013 CRU Acquisitions Group, LLC. All
rights reserved.
Product Warranty
CRU-DataPort (CRU) warrants this product to be free of signicant defects in material and workmanship for a period of ve years from the original date of pur-
chase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not limited to, the implied
warranties of merchantability and tness for a particular purpose and non-infringement of third-party rights with respect to the documentation and hardware.
No CRU dealer, agent, or employee is authorized to make any modication, extension, or addition to this warranty. In no event will CRU or its suppliers be liable
for any costs of procurement of substitute products or services, lost prots, loss of information or data, computer malfunction, or any other special, indirect, con-
sequential, or incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has been advised of the
possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at issue. CRU reserves the right to make modications
and additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is operated in a home or commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.
FOR OFFICE OR COMMERCIAL USE
Product Models DataPort 25 with 6G
Interface Types & Speeds SATA: Up to 6Gbps
SAS: Up to 6Gbps
Drive Types Supported • 2.5-inch Desktop-class SATA Hard Drives (Dual SATA Carrier or
SAS carrier)
• 2.5-inch Enterprise-class SATA Hard Drives (SAS Carrier Only)
• 2.5-inch SAS Hard Drives (SAS Carrier Only)
Connectors • Two (2) SAS/SATA data connectors
• One (1) 4-pin +5/+12v VDC oppy power connector
Operating System
Requirements
• Windows 8, 7, Vista, or XP
• Windows Server 2012, 2008, and 2003 product families
• Mac OS X
• Linux distributions that support SATA
(OS must support failover clustering for SAS operation)
Connector Insertion Rating 25,000+ Carrier-to-frame
Torque 2.5” hard drives, M3 screws: 4 inch-pounds max.
RAID Support Requires host RAID controller
Compliance EMI Standard: FCC Part 15 Class B, CE
EMC Standard: EN55022, EN55024
Shipping Weight 2.00 Pounds (includes accessories)
Product Dimensions Complete Assembly: 4.02” x 6.10” x 1.02” (102mm x 155mm x 26mm)
Removable Carrier: 3.11” x 5.24” x 1.02” (79mm x 133mm x 26mm)
Support Contact us at www.cru-dataport.com/support. We also offer phone sup-
port at (800) 260-9800.
A5-025-0017-1 Rev. 2.1