RAX Branding 2c85m76y PMS 711C 68c70m PMS 2726
1.2 Identifing Parts Table of Contents 1. Pre-Installation Steps 1.1 Box Contents 1.2 Identifying Parts 2 2 2 1.3 Warnings and Notices Take a moment to familiarize yourself with the parts of RTX. This will help you to better understand the following instructions. 3 2. Installation Steps 2.1 TrayFree Bay Drive Installation 2.2 Drive Installation for RTX with Removable Carriers 2.3 Host Connections 3. Operation Steps 4. Write Portection Mode Selection (QJp model only) 5. LED Behavior 5.1 RTX220-3SJ 5.
Front of RTX-3QJ 1.3 Warnings and Notices Please read the following before beginning installation. 1.3.1 General Care Disk Temperature and Health LEDs Fan LED • Proper grounding is strongly recommended to prevent electrical damage to the unit or other connected devices, including the computer host. Avoid all dramatic movement, tapping on the unit, and vibration. • Avoid placing the unit close to magnetic devices, high voltage devices, or near a heat source.
2 Installation Steps 2.1 TrayFree Bay Drive Installation If the hard drives are brand new, or their file systems are not compatible with your operating system, the drive will need to be formatted before being used. Note: This section refers only to RTX220-3SJ, RTX220-3QJ, and RTX200-3QJp If any of the drives are inaccessible after powering on the unit, try the following steps: a) Pull on the ejection handle to open the door.
CRU Mark 10.25.
CRU Mark 10.25.
6.2.2 Mounting and Unmounting Volumes If the hard drive inside of the RTX carrier is already formatted, you can begin using the volume right away. When the RTX-3QR is properly connected and turned on, a window may open to allow you access to the volume.
. Technical Specifications Product Models: RTX220-3SJ, RTX221-3SJ, RTX Secure 222-3SJ, RTX220-3QJ, RTX221-3QJ, RTX Secure 222-3QJ, RTX220-3QJp, RTX221-3QJp, RTX Secure 222-3QJp Data Interface and Speeds: • • • • USB 3.0: Up to 5 Gbps eSATA: up to 2400 Mbps Dual FireWire 800: up to 800 Mbps (QJ and QJp models only) USB 2.0: up to 480 Mbps Drive Types Supported: 3.
