Datasheet

Electrical Characteristics

Stresses greater than those listed may cause permanent damage to the device. This is a

stress rating only, and functional operation of the device at these or any other condi-

tions above those indicated in the operational sections of this specification is not im-

plied. Exposure to absolute maximum rating conditions for extended periods may affect

reliability.

Table 11: SATA Power Consumption

Density Idle Average

Sequential Write Max

(128KB transfer)

Sequential Read Max

(128KB transfer)

120GB 1.2W 4W <4W

240GB 1.2W 5W <5W

480GB 1.2W 6W <6W

800GB 1.2W 6.3W <6.3W

Notes:

1. Data taken at 25°C using a 6 Gb/s SATA interface.

2. Sequential power measured during Iometer with 128KB transfer, RMS average over a

500ms window.

Table 12: Maximum Ratings

Parameter/Condition Symbol Min Max Unit

Voltage input V33 3.14 3.46 V

Operating temperature T

0 70 °C

Non-operating temperature – –40 85 °C

Rate of temperature change – – 20 °C/hour

Relative humidity (non-condensing) – 5 95 %

Table 13: Shock and Vibration

Parameter/Condition Specification

Operating shock 1500G/0.5ms

Operating vibration 10–500Hz at 3.1G

M500DC 1.8-Inch NAND Flash SSD

Electrical Characteristics

PDF: 09005aef854f62f9

M500DC_1_8_disti.pdf - Rev. F 10/14 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.