Datasheet

Table 5: Identify Device (Continued)

See Note 1 for setting definitions

Word Bit(s) Setting Default Value Description

84 – – – Command set/feature-supported extension

15 F 0b Shall be cleared to zero

14 F 1b Shall be set to one

13 F 1b 1 = Idle immediate with unload feature is supported

12 F 0b Reserved for technical report INCITS TR-37-2004 (TLC)

11 F 0b Reserved for technical report INCITS TR-37-2004 (TLC)

10–9 F 00b Obsolete

8 F 1b 1 = 64-bit word wide name is supported

7 F 0b 1 = WRITE DMA QUEUED FUA EXT command is supported

6 F 1b 1 = WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT com-

mands are supported

5 F 1b 1 = General purpose logging feature set is supported

4 F 0b 1 = Streaming feature set is supported

3 F 0b 1 = Media card pass through command feature set is supported

2 F 0b 1 = Media serial number is supported

1 F 1b 1 = SMART self-test is supported

0 F 1b 1 = SMART error logging is supported

85 – – – Command set/feature is enabled

15 X 0b Obsolete

14 F 1b 1 = NOP command is supported

13 F 1b 1 = READ BUFFER command is supported

12 F 1b 1 = WRITE BUFFER command is supported

11 X 0b Obsolete

10 V 1b 1 = Host protected area feature set is enabled

9 F 0b 1 = DEVICE RESET command is supported

8 V 0b 1 = SERVICE interrupt is enabled

7 V 0b 1 = Release interrupt is enabled

6 V 1b 1 = Look-ahead is enabled

5 V 0b 1 = Write cache is enabled

4 F 0b Shall be cleared to zero to indicate that the packet feature set

is not supported

3 F 1b Power management feature set is enabled

2 F 0b Obsolete

1 V 0b 1 = Security mode feature set is enabled

0 V 1b 1 = SMART feature set is enabled

M500DC 1.8-Inch NAND Flash SSD

Device ID

PDF: 09005aef854f62f9

M500DC_1_8_disti.pdf - Rev. D 4/14 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.