User's Manual

(3) Append: Continuously output barcodes;

(4) Auto clear: Automatically clear the last barcode before the next

barcode scanning starts;

(5) Booted start: Automatically turn on the Scan tool when booting up;

(6) Show type: Display the barcode type while scanning;

(7)Stop scan on up: Loosen scan button and the scan lighting immediately

turns off, or press scan button and the scan lighting continues for a certain

time range (set Scan duration ) before turning off;

(8) Loop scan: Automatically scan barcode continuously; if switch on

continuous lighting mode in Basic settings and then scan with continuous

lighting;

(9) Interval: Set time delay between two scans;

(10) Restore the barcode default settings: you can restore the barcode

default settings, as shown in Figure 8-5;

(11) barcode suffix: Add barcode output suffix on your own (They can be

numbers, letters, special characters, etc.);

(12) barcode prefix: Add barcode output prefix on your own (they can be

numbers, letters, special characters, etc.);

(13) End Char: you can choose the barcode to end the output, including:

Enter, Tab, Space, None;

(14) Barcode Send Mode: Select Focus, Broadcast, EmuKey or Clipboard

to send (Emukey needs the input which supports the hard keys), as shown