Repair manual

-
LAND CRUISER (3B,2H ENGINE) - Maintenance Operations
3-9
38 Eng ine 2H Engine
11 Throttle
Adjusti ng Screw Ful l
Filler
~ Adjusting
2H Engine
<~;;: :-71 Stop Plate
~ Adjust in g Screw
for T IM
M ~7 MA0255
5mm
P lu g
for Tra nsf er
5mm
17. ADJUST IDLE SPEED
(al I nitial conditions :
• Air cleaner installed
,
• Engine coolant normal operating temperature
• Accessories switched off
• Transm issi on in n eutral
(bl Check that the venturi lever touches the full throttle
adjusting screw when the accelerator pedal is de ·
pressed all the way.
(cl
Check that the venturi lever touches the stop plate
adjusting screw
when the accelerator pedal is released.
If not, adjust the accelerator linkage.
Id) I nstall a tachometer to the engine.
le) S tart the engine.
If) Check the engine idle speed.
Idle speed : 38 engine 650 rpm
2H engine (M/T) 650 rpm
(AfT) 750 rpm
If not specified, adjust by turning the stop pla te adjusting
screw.
TRANSMISSION
18. CHECK OIL LEVEL IN MANUAL TRANSMISSION,
TRANSFER AND DIFFERENTIAL
Remove the filler plug and feel inside the hole with your
finger. Check that the oil comes to within 5 mm (0.20 in.!
of the bottom edge of the hole. If the level is low, add oil
until it begins
to run out of the filler hole.