Specifications

Signal

Strength

Meter

Indicate the strength level of presence radar or laser signal.

Laser

Signal

Indicator

’ L ’ lights and blinks to indicate the presence

of a laser signal. A distinct audio alert is also heard.

Mounting

Bracket

Location

Slot holds mounting bracket firmly.

INSTALLING

THE

UNIT

Mounting

Guidelines

For the best performance, select the proper location for the detector where it

has a direct view of the road. Remember, the radar antenna and laser sensor

are located behind the rear panel of the unit. The antenna and sensors should

not be obstructed by metal or metallic surfaces and should be pointed at the

horizon for accurate long-range detection.

Choose a location that does not block the driver's vision.

Mount the detector in a level position.

Do not mount the detector behind the metal surfaces, windshield antenna,

wiper blades, and ornaments mirrored sunscreen.

Window tinting reduces the received strength of laser signals; do not mount

the detector behind tinted glass. Do not mount the detector where the driver

or passenger might hit in a sudden stop or accident.

Mounting

Type

There are two ways of installation of CRUNCH laser/radar detector

Hook-and

Loop

Mounting

The hook-and-loop tape included with your detector

might be the best mounting method for some

dashboards.

Follow these instructions to use the hook-and-loop

tape.

1. Use a damp cloth to thoroughly clean both

the bottom of the detector and the dashboard.