Owner`s manual

O P E R A T I O N A L C O N T R O L S
16
2
5
The LOW PASS controller adjusts the cut-off point of the frequency range to above. The cut-off frequency is
continuously adjustable from 40 Hz to 150 Hz. A good value to start is at 80 Hz.
FUNCTIONS
1
3
4
The BASS EQ controller adjusts the bass enhancement between 0db and +12dB at 45 Hz.
1 432 5 6 7
The PHASE switch allows to change the phase from 0° to 180°. This is useful to match the subwoofer with the vehicle’s interior
acoustic.
STATUS LED. If the LED lights up green, the amplifier is ready for operation. If the LED lights up red, a malfunction is indicated.
Check in this case the chapter TROUBLE SHOOTING.
The SUBSONIC controller (Subsonicfilter) limits the ultralow and not hearable frequencies of the audiosignal to below, to avoid
a mechanical and electical overloading on the subwoofer. The cut-off frequency is adjustable from 15 to 40 Hz and depends on
the size of the subwoofer.
6
The GAIN controller adjusts the input sensitivity of the amplifier to align the audio signal from the head unit.
The input sensitivity is adjustable from MIN to MAX.
6
Connect the REMOTE socket with the bass remote controller. The bass remote controller adjusts the bass level e.g. out of the
driver’s seat. Please use only the enclosed bass remote controller and cable.