User`s manual

ENG

3-CHANNEL OPERATION STEREO/MONO (FIG. 4)

If you want to run the amplifier with 4 line output channels from the headunit to drive 2 loudspeakers

in stereo and a subwoofer, connect the following setup:

(1) RCA audio signal input from the headunit, CH1 / FRONT LEFT

(2) RCA audio signal input from the headunit, CH2 / FRONT RIGHT

(3) RCA audio signal input from the headunit, CH3 / REAR LEFT or SUB OUT

(4) RCA audio signal input from the headunit, CH4 / REAR RIGHT or SUB OUT

(5) Stereo high level input for loudspeaker outputs from the headunit FRONT L/R

(6) Stereo high level input for loudspeaker outputs from the headunit REAR L/R

(7) Loudspeaker CH1 / FRONT LEFT (2 - 8 Ohms)

(8) Loudspeaker CH2 / FRONT RIGHT (2 - 8 Ohms)

(9) Subwoofer CH3/4 (4 - 8 Ohms)

NOTE: (1 – 4) must not be operated simultaneously with (5 & 6).

If you want to run the amplifier with 2 line output channels from the headunit to drive 2 subwoofers in

mono, connect the following setup:

(1) RCA audio signal input from the headunit, CH1 / FRONT LEFT or SUB OUT 1

(2) RCA audio signal input from the headunit, CH2 / FRONT RIGHT or SUB OUT 2

(3) RCA audio signal input from the headunit, CH3 / REAR LEFT or SUB OUT 1

(4) RCA audio signal input from the headunit, CH4 / REAR RIGHT or SUB OUT 2

NOTE: Split the subwoofer signal coming from the headunit by using two Y-connectors, to supply a

audio signal to the connections (1 - 4).

(5) Stereo high level input for loudspeaker outputs from the headunit FRONT L/R

(6) Stereo high level input for loudspeaker outputs from the headunit REAR L/R

(7) Subwoofer 1 CH1/2 (4 - 8 Ohms)

(8) Subwoofer 2 CH3/4 (4 - 8 Ohms)

NOTE: (1 – 4) must not be operated simultaneously with (5 & 6).

2-CHANNEL OPERATION MONO (FIG. 5)

4-CHANNEL OPERATION STEREO (FIG. 3)

If you want to run the amplifier with 4 line output channels from the headunit to drive 4 loudspeakers,

in stereo connect the following setup:

(1) RCA audio signal input from the headunit, CH1 / FRONT LEFT

(2) RCA audio signal input from the headunit, CH2 / FRONT RIGHT

(3) RCA audio signal input from the headunit, CH3 / REAR LEFT

(4) RCA audio signal input from the headunit, CH4 / REAR RIGHT

(5) Stereo high level input for loudspeaker outputs from the headunit FRONT L/R

(6) Stereo high level input for loudspeaker outputs from the headunit REAR L/R

(7) Loudspeaker CH1 / FRONT LEFT (2 - 8 Ohms)

(8) Loudspeaker CH2 / FRONT RIGHT (2 - 8 Ohms)

(9) Loudspeaker CH3 / REAR LEFT (2 - 8 Ohms)

(10) Loudspeaker CH4 / REAR RIGHT (2 - 8 Ohms)

NOTE: (1 – 4) must not be operated simultaneously with (5 & 6).