Operating instructions

!
Battery Charger
When the charger is operating correctly the ‘On Charge’ light will
activate. If this fails then check that the lead is correctly plugged in
to the power point and the back of the unit. The battery charger also
has an ‘on/off’ switch on the unit this should remain ‘ON’ at all times.
A fuse is located at the rear of the unit which needs to be unscrewed
from the unit.
What will accompany the “On Charge Light” will be one of the three
other lights.....”Bulk”....Absorption”......”Float”.....if this doesn’t
occur check unit.
If charger is ON, but still no charge is taking place then check nearby
fuse.
!
!
!
!
! 14