Operating instructions

!
!
BRAKE SAFE SYSTEM:
!
The brake safe device is designed to automatically apply the electric
brakes to the caravan in the event of an accidental separation from
the towing vehicle.
!
!
The metal cable is attached to a permanent anchor point on the
towing vehicle with minimal amount of slack in the cable to allow the
pin in the brake safe switch to be pulled out of its housing to activate
the emergency braking system.
!
IMPORTANT:
Do not use the brake safe system as a hand brake. This will cause the
battery powering the brake safe system to lose power and became
inoperative. (Flat battery)
! 17
Breakaway
switch
Cable to be
affixed to the
towing vehicle
Manual
changeover
valve