Service manual

Engine Block Plug Installation
SIE-ID = 348917
Tools Required
J 41712 Oil Pressure Switch Socket
Caution: Refer to Safety Glasses Caution in
Cautions and Notices.
1. Install the transmission locator pins, if required.
A properly installed transmission locator pin will
protrude 12.7 mm (0.5 in) from the rear face of the
engine block.
2. Apply sealant GM P/N United States 12346004,
GM P/N Canada 10953480, or equivalent, to the
outside diameter of the NEW camshaft rear
bearing hole expansion cup plug.
3. Install the NEW camshaft rear bearing hole
expansion cup plug.
4. Install the crankshaft rear oil seal housing locator
S type pin.
182855
182854
521836
6-104 Engine Mechanical - 5.0L and 5.7L Engine
2002 - Unit Repair (May 25, 2001)