Service manual

Camshaft Installation
SIE-ID = 66855
Notice: SIO-ID = 13833 All camshaft journals are the
same diameter, so care must be used in removing
or installing the camshaft to avoid damage to
the camshaft bearings.
1. Lubricate the following components with clean
engine oil GM P/N United States 12345610,
GM P/N Canada 993193, or equivalent, or engine
oil supplement GM P/N United States 1052367,
GM P/N Canada 992367, or equivalent:
• The engine camshaft lobes
• The camshaft bearing journals
• The camshaft bearings
• The distributor drive gear
2. Install the 3 5/16–18 x 4.0 inch bolts in the engine
camshaft bolt holes.
3. Install the engine camshaft using the bolts as a
handle.
4. Remove the 3 bolts from the engine camshaft.
Notice: Refer to Fastener Notice in Cautions and
Notices.
5. Install the camshaft retainer and bolts.
Tighten
Tighten the camshaft retainer bolts to
12 N·m (106 lb in).
69013
182836
6-114 Engine Mechanical - 5.0L and 5.7L Engine
2002 - Unit Repair (May 25, 2001)