Service manual

Oil Pan Installation
SIE-ID = 66859
Notice: Refer to Fastener Notice in Cautions and
Notices.
1. Install the oil pan studs into the engine block.
Tighten
Tighten the oil pan studs to 6 N·m (53 lb in).
2. Apply a 5 mm (0.197 in) wide and 25 mm (1.0 in)
long bead of adhesive GM P/N United
States 12346141, GM P/N Canada 10953433, or
equivalent, to the engine front cover to engine
block junction at the oil pan sealing surfaces.
3. Apply a 5 mm (0.197 in) wide and 25 mm (1.0 in)
long bead of adhesive GM P/N United
States 12346141, GM P/N Canada 10953433, or
equivalent, to the crankshaft rear oil seal
housing to engine block junction at the oil pan
sealing surfaces.
521817
317310
317313
Engine Engine Mechanical - 5.0L and 5.7L 6-119
2002 - Unit Repair (May 25, 2001)