Service manual

Important: Always install a NEW oil pan gasket.
The oil pan gasket and oil pan must be installed and
the fasteners tightened while the adhesive is still
wet to the touch.
4. Install the NEW oil pan gasket.
5. Install the oil pan.
Press the oil pan gasket into the grooves of the
engine front cover and crankshaft rear oil
seal housing.
6. Install the oil pan reinforcements.
7. Install the nuts and the bolts.
Tighten
7.1. Tighten the oil pan bolts to
12 N·m (106 lb in).
7.2. Tighten the oil pan nuts to 25 N·m (18 lb ft).
8. Install a NEW oil pan drain plug seal, O-ring, onto
the oil pan drain plug.
9. Install the oil pan drain plug into the oil pan.
Tighten
Tighten the oil pan drain plug to 25 N·m (18 lb ft).
182851
182850
6-120 Engine Mechanical - 5.0L and 5.7L Engine
2002 - Unit Repair (May 25, 2001)