Service manual

Notice: Refer to Fastener Notice in Cautions and
Notices.
5. Use the J 23523-F in order to press the crankshaft
balancer onto the crankshaft.
5.1. Install the J 23523-F plate and bolts onto
the front of the crankshaft balancer.
Tighten
Tighten the
J 23523-F plate bolts to
25 N·m (18 lb ft).
5.2. Install the J 23523-F screw into the end for
the crankshaft.
5.3. Install the J 23523-F bearing, the washer,
and the nut onto the
J 23523-F screw.
5.4. Rotate the
J 23523-F nut clockwise until the
crankshaft balancer hub is completely
seated against the crankshaft position
sensor reluctor ring.
6. Remove the
J 23523-F .
7. Install the crankshaft pulley and bolts.
Tighten
Tighten the crankshaft pulley bolts to
58 N·m (43 lb ft).
8. Ensure that the crown of the crankshaft balancer
washer (2) is faced away from the engine.
4065
188055
342203
6-122 Engine Mechanical - 5.0L and 5.7L Engine
2002 - Unit Repair (May 25, 2001)