Service manual

6. Install the fan and water pump pulley and bolts
using the
J 41240 .
Tighten
Tighten the fan and water pump pulley bolts to
25 N·m (18 lb ft).
Oil Level Indicator and Tube Installation
SIE-ID = 349357
1. Apply sealant GM P/N United States 12346004,
GM P/N Canada 10953480, or equivalent, around
the oil level indicator tube 13 mm (0.5 in) below
the tube bead.
2. Install the oil level indicator tube into the engine
block. Rotate the oil level indicator tube into
position.
Notice: Refer to Fastener Notice in Cautions and
Notices.
3. Install the oil level indicator tube bolt.
Tighten
Tighten the oil level indicator tube bolt to
25 N·m (18 lb ft).
Exhaust Manifold Installation - Left
SIE-ID = 650071
1. Install the NEW exhaust manifold gasket.
2. Install the exhaust manifold.
3. Install the spark plug wire shields.
4. Apply threadlock GM P/N United States 12345493,
GM P/N Canada 10953488, or equivalent, to the
threads of the exhaust manifold bolts.
Notice: Refer to Fastener Notice in Cautions and
Notices.
5. Install the exhaust manifold bolts.
Tighten
5.1. Tighten the exhaust manifold bolts on the
first pass to 15 N·m (11 lb ft).
5.2. Tighten the exhaust manifold bolts on the
final pass to 30 N·m (22 lb ft).
317191
500691
64925
Engine Engine Mechanical - 5.0L and 5.7L 6-137
2002 - Unit Repair (May 25, 2001)