Service manual

2. Remove the bolts and the crankshaft pulley.
Notice: Refer to Fastener Notice in Cautions and
Notices.
3. Use the
J 23523-F in order to remove the
crankshaft balancer.
3.1. Install the J 23523-F plate and bolts onto
the crankshaft balancer.
Tighten
Tighten the bolts to 25 N·m (18 lb ft).
3.2. Install the
J 23523-F forcing screw into
the plate.
3.3. Rotate the J 23523-F forcing screw
clockwise in order to remove the crankshaft
balancer.
4. Remove the
J 23523-F from the crankshaft
balancer.
5. Note the position and length of any front groove
crankshaft balancer weight pins, if applicable.
188055
66878
182849
6-22 Engine Mechanical - 5.0L and 5.7L Engine
2002 - Unit Repair (May 25, 2001)