Service manual

2. Remove the lower intake manifold bolts.
Important: The intake manifold may be removed as
an assembly. Do not remove the specific intake
manifold components unless component service is
required.
Do not allow dirt or debris to enter the fuel system.
Ensure that the ends of the fuel system are properly
sealed.
Do not disassemble the Central Sequential Fuel
Injection (SFI) unit, unless service is required.
3. Remove the intake manifold assembly.
4. Remove and discard the lower intake manifold
gaskets.
Valve Rocker Arm and Push Rod Removal
SIE-ID = 66690
Important: Mark, sort, and organize the components
so that the components can be reinstalled to the
original location.
1. Remove the following components from the
cylinder head:
1.1. The valve rocker arm nuts (1)
1.2. The valve rocker arm balls (2)
1.3. The valve rocker arms (3)
2. Remove the valve pushrods.
66456
182835
22766
Engine Engine Mechanical - 5.0L and 5.7L 6-25
2002 - Unit Repair (May 25, 2001)