Service manual

Piston and Connecting Rod Disassemble
SIE-ID = 195087
Tools Required
J 24086-C Piston Pin Remover/Installer
Caution: Refer to Safety Glasses Caution in
Cautions and Notices.
1. Remove the piston rings from the pistons.
2. Press the piston pin from the connecting rod
using the
J 24086-C .
The piston pin has an interference fit into the
connecting rod, and is full floating in the piston.
3. Mark, separate, and organize the parts for
assembly.
4967
4965
34671
6-46 Engine Mechanical - 5.0L and 5.7L Engine
2002 - Unit Repair (May 25, 2001)