Service manual

3. Space the compression piston ring end gaps
120 degrees apart.
4. Space the oil control piston ring end gaps a
minimum of 90 degrees apart.
Crankshaft and Bearings Cleaning and
Inspection
SIE-ID = 69074
Tools Required
•
J 7872 Magnetic Base Dial Indicator
•
J 36660-A Torque Angle Meter
•
J 43690 Rod Bearing Clearance Checking Tool
Caution: Refer to Safety Glasses Caution in
Cautions and Notices.
Important: Use care when handling the crankshaft.
Avoid damage to the crankshaft bearing surfaces.
1. Clean the crankshaft in cleaning solvent. Remove
all sludge or restrictions from the oil passages.
2. Dry the crankshaft with compressed air.
3. Clean the crankshaft bearings in cleaning solvent.
Wipe the crankshaft bearings clean with a soft
cloth. Do not scratch the crankshaft bearing
surfaces.
4. Dry the crankshaft and crankshaft bearings with
compressed air.
4967
59918
334386
Engine Engine Mechanical - 5.0L and 5.7L 6-51
2002 - Unit Repair (May 25, 2001)