Service manual

4. Insert a piece of paper card stock onto the
crankshaft journal. Install the bearing half, bearing
cap, and bolts. Refer to
Fastener Tightening
Specifications
.
5. Install the foot (1) and bolt (2) to the pivot arm
assembly (3).
6. Tighten the bolt until snug.
7. Install the screw (1 or 3) to the pivot arm
assembly (2).
627102
627106
Engine Engine Mechanical - 5.0L and 5.7L 6-57
2002 - Unit Repair (May 25, 2001)