Service manual

Camshaft Bearing Removal
SIE-ID = 195130
Tools Required
J 33049 Camshaft Bearing Service Kit
1. Select the cone (1), the handle (10), the
expanding driver (4–8), the washer (2 or 3), and
the expander assembly (15) from the
J 33049 .
2. Assemble the
J 33049 .
Caution: Refer to Safety Glasses Caution in
Cautions and Notices.
Important: A loose camshaft bearing may be caused
by an enlarged, out-of-round, or damaged engine
block camshaft bearing bore.
Important: Always remove the camshaft inner
bearings #2, #3, and #4 first. The camshaft outer
bearings #1 and #5 serve as a guide for the
J 33049 .
3. Remove the camshaft inner bearings #2, #3,
and #4.
3.1. Insert the
J 33049 through the front of the
engine block and into the camshaft inner
bearing #2.
3.2. Tighten the
J 33049 expander assembly nut
until snug.
3.3. Push the J 33049 guide cone into the
camshaft front bearing in order to align
the
J 33049 .
3.4. Drive the camshaft inner bearing #2 from
the camshaft inner bearing bore #2.
3.5. Loosen the
J 33049 expander assembly nut.
3.6. Remove the camshaft inner bearing #2
from the J 33049 expander assembly.
3.7. Insert the
J 33049 expander assembly into
the camshaft inner bearing #3.
3.8. Tighten the J 33049 expander assembly nut
until snug.
3.9. Push the J 33049 guide cone into the
camshaft front bearing in order to align
the
J 33049 .
3.10. Drive the camshaft inner bearing #3 from
the camshaft inner bearing bore #3.
3.11. Loosen the
J 33049 expander assembly nut.
3.12. Remove the camshaft inner bearing #3
from the J 33049 expander assembly.
3.13. Insert the
J 33049 expander assembly into
the camshaft inner bearing #4.
66100
4985
Engine Engine Mechanical - 5.0L and 5.7L 6-69
2002 - Unit Repair (May 25, 2001)