Service manual

6. Install the valve spring (3).
7. Install the valve spring cap (2) onto the valve
spring (3), over the valve stem.
Caution: SIO-ID = 411464 Compressed valve springs
have high tension against the valve spring
compressor. Valve springs that are not properly
compressed by or released from the valve
spring compressor can be ejected from the valve
spring compressor with intense force. Use
care when compressing or releasing the valve
spring with the valve spring compressor and when
removing or installing the valve stem keys.
Failing to use care may cause personal injury.
8. Use the J 8062 to compress the valve spring.
9. Install the valve stem O-ring seal.
10. Install the valve stem keys.
10.1. Use grease to hold the valve stem keys in
place while disconnecting the
J 8062 .
10.2. Tap the end of the valve stem with a
plastic-faced hammer to seat the valve
stem keys.
10.3. Inspect the valve stem keys to ensure that
they are seated in the upper groove of the
valve stem.
334505
34468
6-84 Engine Mechanical - 5.0L and 5.7L Engine
2002 - Unit Repair (May 25, 2001)