Owner's Manual

ManualsBrandsCRUX ManualsApple & Android integrationACP-WLX

ACP-WLX

Wireless CarPlay and Android Auto Dongle

for Select OEM and Aftermarket Radios with CarPlay or Android Auto

INTERFACING SOLUTIONS

Sightline

Multi View Integration

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

- Converts wired CarPlay and Android Auto to wireless.

- Works on select OEM and Aftermarket radios with built-in CarPlay or Android Auto.

- Completely plug and play.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

INSTALLATION INSTRUCTIONS:

1. Plug in the ACP-WLX to the

CarPay

2. Android Auto USB port of the

radio.

3. Turn the radio ON and select the

USB port that corresponds to the

CarPlay or Android Auto input.

4. Wait until the ACP-WLX connection

shows on the screen.

5. Go to the Bluetooth setting on

your phone and connect to the BT

listed on the radio screen.

6. Enjoy your wireless CarPlay or

Android Auto!

ACP-WLX Connection Screen

USB cable Type-C to Type-A

USB cable Type-C to Type-C

ACP-WLX module

1 of 8

rev.04082022

Summary of content (8 pages)

PAGE 1
R ACP-WLX Sightline Multi View Integration Wireless CarPlay and Android Auto Dongle for Select OEM and Aftermarket Radios with CarPlay or Android Auto INTERFACING SOLUTIONS PRODUCT FEATURES: - Converts wired CarPlay and Android Auto to wireless. - Works on select OEM and Aftermarket radios with built-in CarPlay or Android Auto. - Completely plug and play. PARTS INCLUDED: USB cable Type-C to Type-A ACP-WLX module USB cable Type-C to Type-C INSTALLATION DIAGRAM: INSTALLATION INSTRUCTIONS: 1.
PAGE 2
INTERFACES 1 2 1 USB Type-C port: connect to car 2 LED indicators • • • • 3 3 Power on: red light is always on Connected to car successfully: blue light on AA/CP connected: Updating: Apple CarPlay connection CarPlay mode Android Auto mode Double-tap to switch mode between CP & AA 2 of 8 rev.
PAGE 3
CONNECTION DIAGRAM Factory USB A port Type-C USB - A OR Type-C Type-C Factory USB C port NOTE! The adapter should be plugged into the USB port that is for wired Apple CarPlay/Android Auto connecting if there are multi USB ports in your car. 3 of 8 rev.
PAGE 4
HOW TO USE WIRELESS ANDROID AUTO Before using Android Auto, please make sure the latest Android Auto app installed on your smartphone. • Enable “wireless Android Auto” on Android Auto app settings • Turn on your smartphone’s WiFi / Bluetooth and search BT name “AUTO-xxxx” then tap it to pair • • It will then connect to Android Auto wirelessly after a few seconds. NOTE! NOT COMPATIBLE WITH SONY XAV-3200, XAV-3000, XAV-AX5500, XAV-AX5000, XAV-305DB, XAV-AX1000 NOTE! Wireless Android Auto is supported on: 1.
PAGE 5
HOW TO USE WIRELESS CARPLAY • Turn on your iPhone’s WiFi and Bluetooth, then pair to the Bluetooth named “AUTO-xxxx” • Tap “Pair-Allow-Use CarPlay” • It will connect to CarPlay wirelessly after a few seconds. NOTE! NOT COMPATIBLE WITH SONY XAV-3200, XAV-3000, XAV-AX5500, XAV-AX5000, XAV-305DB, XAV-AX1000 NOTE! Before pairing to a new iPhone/Android phone, please disconnect the currently connected phone from WiFi and Bluetooth.. 5 of 8 rev.
PAGE 6
FIRMWARE UPDATE Firmware updating is NOT recommended when every function works well. NOTE! Wait for more 30s after lights are always on, then disconnect and reconnect 6 of 8 rev.
PAGE 7
UPDATE ON IPHONE • If your iPhone is connecting to the wireless CarPlay, enter 192.168.1.101 on iPhone’s browser, next tap “Update” if there is an update available • If your iPhone could not connect to the wireless CarPlay, please join the adapter’s WiFi network [AUTO-xxxx] by manual and the password is 88888888. Next enter 192.168.1.101 on iPhone’s browser, and tap “Update”.
PAGE 8
• Enter 192.168.1.101 on smartphone browser, next tap “Switch P2P” • On your phone, go to WiFi >> Advanced settings >> WiFi direct, tap [AUTO-xxxx] and make sure it has connected • Enter 192.168.1.101 again on smartphone browser, next tap “Update”. 8 of 8 rev.