Installation Manual

For Bluetooth function:
1. Turn on the radio and press the CD button. Screen will show “CD1 01”.
2. Go to the Bluetooth menu on your phone and connect to “Crux BT”.
3. BTS-HN2 will announce when the phone has been connected.
4. Play the music on your phone or other audio player and audio should be heard on the factory
sound system.
For USB Mode:
1. Plug in your USB flash drive to the BTS-HN2 USB port.
2. Turn on the radio and press the CD button. Screen will show “CD1 01”.
3. BTS-HN2 will announce “USB Mode”.
4. USB Audio should be heard on the factory sound system. Use the radio knobs or steering wheel
controls to track up and track down.
For Line-In Mode:
1. Plug in a 3.5mm to 3.5mm cable (sold separately) to the BTS-HN2 USB line-in jack.
2. Turn on the radio and press the CD button. Screen will show “CD1 01”.
3. BTS-HN2 will announce “Line-In Mode”.
4. Plug the other end of the 3.5MM cable to the audio player and press play. Audio should be heard
on the factory sound system.
1. Pop-in magnetic head to base socket.
2. Tighten locking nut to desired tilt.
3. Slide into the AC vent grille.
4. Use the desired metal plate size and stick
on the back of the phone or insert behind
the phone case.
Acura
Honda
MDX
2005-2006
Accord
2003-2012
RSX
2004-2006
Civic
2006-2012
TSX
2004-2009
CR-V
2005-2012
Crosstour
2010-2012
Element
2003-2011
Fit
2007-2012
Insight
2010-2012
Odyssey
2005-2010
Pilot
2004-2011
Ridgeline
2006-2012
S2000
2004-2009
rev.092117
2/2