Owner Manual

19
9. Perfectly temped water will shower over the coffee bed. The flavor infusion carafe
lid evenly distributes coffee throughout the brewing process to maximize the flavors
and aromas of the grounds and ensure hotter, better-tasting brews.
NOTE: To interrupt the brew process at any time, press the white BREW PROGRAM/
OFF button. The illuminated button, backlighted screen and Coffee Maker will turn OFF.
(The GROUND COFFEE and CAPSULE buttons illuminate solid white.)
10. Upon completion of the brew cycle, 3 tones will sound. The screen will darken.
The BREW PROGRAM/OFF button will illuminate solid white as the Coffee Maker
advances to KEEP WARM.
NOTE: To check the freshness of the brewed coffee while in the KEEP WARM cycle,
press HOUR or MINUTE button to illuminate the backlighted screen and confirm how
much TIME SINCE BREW.
11. The carafe lid should be closed facilitate safe serving and help keep coffee at a proper
serving temperature.
12. At the end of the default 2:00 hour or pre-programmed KEEP WARM cycle, 2 tones
will sound, and the Coffee Maker will turn OFF.
NOTE: Brew function of carafe side and single serve side cannot be performed
simultaneously. However, the brew function of the single serve side can be performed
during the keep warm period of the carafe side.
Pause & Serve
1. To serve a cup of coffee before the brew cycle is complete, slowly remove carafe
from the warming plate. Dripping will automatically cease. Return the carafe onto
the warming plate; dripping will resume.
CAUTION: To prevent injury when utilizing the Pause & Serve feature, replace carafe
within 30 seconds after removing during the brewing process.
2. The flow valve is located on the bottom of the filter holder and is activated when
the carafe is removed. (See Figure 1.)
IMPORTANT: When replacing the filter holder, the flow valve must be properly inserted
into the front cavity of the machine, so that it can be seen as it sits on the top of the carafe lid.
(See Figure 1.)