Owner's Manual

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.020420
SWRHN-62D
Radio Replacement with Steering Wheel Retention for
Select HONDA Vehicles
1 of 2
RADIO REPLACEMENT
SWC RETENTION
+
R
INTERFACING SOLUTIONS
- Retains factory features in select Honda vehicles while functioning with an aftermarket radio.
- Pre-programmed to retain factory Steering Wheel Controls.
- Retains Factory Auxiliary Input.
- Includes Honda antenna adapter.
- EIA color coded wiring for easy installation.
PRODUCT FEATURES:
PARTS INCLUDED:
INSTALLATION DIAGRAM:
SWRHN-62D MODULE SWRHN-62D HARNESS ANTENNA ADAPTER SWC CABLE
AFTERMARKET
RADIO
12V Constant Yellow
+12V ACC Red
Ground Black











TO FACTORY
HARNESS
12-Pin Black
Connector
SWC
MODULE
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
3.5MM SWC CABLE
Plug in the 3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS” section.
AFTERMARKET
RADIO SELECTOR
(See Chart)
HONDA
SWC SETTING
(OFF ON ON OFF)
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
4-Pin
Connector

BLUE / YELLOW (for Kenwood & JVC)
Insulate with tape
if not being used