Manual

ManualsBrandsCrux ManualsAV Input & Phone MirroringWi-Fi A/V Input w/Video in Motion for Chrysler/Jeep/Dodge/Ram

DODGE

2014 – 2015 Durango

RAM*

2013 – 2016 1500

2013 – 2016 2500

2013 – 2016 3500

JEEP

2014 - 2016 Grand Cherokee

*NOT compatible with diesel powered RAM trucks

- Enables wireless (Wi-Fi) Audio/Video mirroring from mobile devices to the OEM display screen for

shared linking of functions from most Smartphones to the OEM Screen.

- Provides an A/V input for devices with composite audio/video output.

- Offers 2 video outputs for multiple screen applications.

- Plug and Play Installation.

- Compatible with iOS and Android devices.

- Compatible with 8.4” and 5” Uconnect Radios.

- For vehicles without factory rear-view camera, see Part#: WVICH-03B

WVICH-03 CAN MODULE

WVICH-03 A/V Interface Harness

WVI-X WiFi Interface

WVICH-03 VIM MODULE

1 / 4

Rev.081817

Now Streams YouTube videos

from iOS Devices!

Summary of content (4 pages)

PAGE 1
Now Streams YouTube videos from iOS Devices! DODGE 2014 – 2015 Durango JEEP 2014 - 2016 Grand Cherokee RAM* 2013 – 2016 2013 – 2016 2013 – 2016 1500 2500 3500 *NOT compatible with diesel powered RAM trucks - Enables wireless (Wi-Fi) Audio/Video mirroring from mobile devices to the OEM display screen for shared linking of functions from most Smartphones to the OEM Screen. - Provides an A/V input for devices with composite audio/video output. - Offers 2 video outputs for multiple screen applications.
PAGE 2
THE AV INTERFACE: 1. Remove the factory radio from the dashboard. 2. Remove the factory connectors from behind the factory radio. 3. Mate the T-Harness connections to the factory connectors. (Make sure all connectors are properly seated into the interface and into the radio.) 4. On the CAN Module, set DIP switch number 4 to ON to enable AV Input. 5.
PAGE 3
9. The WVICH-03 also offers 2 RCA video outputs for multiple monitor set-ups. 10. An HDMI output is available for HD video resolution. HDMI cable is not included in the kit. 11. Switch to the new AV input by pressing the BACK button on the radio or the middle button on the SWC. (See below) 12. Test the interface and re-install the radio into the dash. Make sure the DIP#4 is set to the ON position. This sets the programming to the vehicle.
PAGE 4
For the Android system: From the drop down drawer, press “Quick Connect” > Select “WiFiCar *****” Notes: 1) Make sure the “Power Saving Mode” is turned off. 2) Make sure Quick Connect is updated to the latest version. MIRRORING: The mirroring connection uses a direct Wi-Fi connection to transfer the Audio and Video from your device. You will still be able to browse the internet or stream audio/video using your data plan.