Owner’s Manual

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1103206 of 8
WVIGM-04
Wi Connectivity Integration for
Select GM LAN 29 Bit Vehicles 2006-2015
R
INTERFACING SOLUTIONS
A/V
SERIES
4 5 6
ON
1 2 3
FACTORY
A/V INPUT
HDMI OUTPUT
Wi-Fi
INTERFACE
A/V INPUT
RED = +12V ACC
BLACK = GROUND
BLUE = A/V TRIGGER*
*Connect BLUE A/V Trigger
to +12V to toggle A/V INPUT
A/V Extension
Cable
Video Out
(to extension monitors)
Video Input (or Camera)
Right Audio Input
Left Audio Input
USB Input
IR Extension
STATUS LEDs
INSTALLATION INSTRUCTIONS:
VIRTUAL REMOTE CONTROL:
The WVI-H comes with a Virtual Remote Control via a Wi connecon. To access the virtual remote control,
make sure that the phone is connected to Crux Wi ***. Open your web browser and type in the following on
the address bar: 192.168.59.254
The Virtual Remote control will open. Use the virutal remote control to PLAY, PAUSE,
STOP, TRACK UP/DOWN, VOLUME UP/DOWN, etc.
Plug in a USB thumb drive to the USB cable port of the WVI-H.
Tap OPTIONS on the Vritual Remote Control to select MOVIES,
PHOTOS, MUSIC, etc. Use the remote to play/pause or skip tracks.
Tap SETUP to change sengs on VIDEO, SYSTEM, NETWORK, and AUDIO.
We recommend NOT to change any SYSTEM sengs as this would interfere
with the WVI-H funconality.
CONNECTING THE WVI-H WiFi MODULE
Tap power and ground of the WiFi module to to the Red and Black wire coming out of the WVIGM-04 main module.