Owner’s Manual

Crux Interfacing Solutions • Chatsworth, CA 91311
phone: [phone] • fax: [phone] • www.cruxinterfacing.com
rev.1103207 of 8
WVIGM-04
Wi Connectivity Integration for
Select GM LAN 29 Bit Vehicles 2006-2015
R
INTERFACING SOLUTIONS
A/V
SERIES
SETTING YOUR DEVICE:
With the WVI-H module ON and READY:
For iOS Devices:
Open sengs > Select Wi-Fi > Under
‘Choose Network’ Select “Crux WiFi ***”
Aer connecng to Crux Wi, select
“SCREEN MIRRORING” from the Control
Center and tap Crux Wi ***. To access
Control Center, on iPhone X, pull down
from the upper right corner of the screen,
on other iPhone models, pull up from the
boom of the screen.
For Android Devices:
From the drop down drawer, press “Quick Connect” > Select “Crux Wi ***”
Notes:
1) Make sure the “Power Saving Mode” is turned o.
2) Make sure Quick Connect is updated to the latest version.
MIRRORING:
The mirroring connecon uses a direct Wi-Fi connecon to transfer the Audio and Video from your
device to the WVI-H module. This does not require an acve network. If your smartphone has the Screen
Time Out enabled and your display goes to sleep mode, you will no longer see the image on the screen.
Deacvate this feature for connuous viewing
NOTES:
1. Does not support Nelix and any DRM protected
les on iOS devices due to Restricons by Apple.