Datasheet

CMX Series
• SIP SSR
• Ratings to 20A @ 60 VDC, 10A @ 100 VDC, 10A @ 60 VDC
and 3A @ 200 VDC
• MOSFET output
• DC control
• Low on-state im
p
edance
PRODUCT SELECTION
Control Voltage 3A 5A 6A 10A 10A 20A
3-10 VDC CMX200D3 CMX60D5 CMX100D6 CMX60D10 CMX100D10 CMX60D20
OUTPUT SPECIFICATIONS (1)(4)
Description
Operating Voltage [VDC] 0-200 0-60 0-100 0-60 0-100 0-60
Maximum Off-State Leakage Current @ Rated Voltage [µAdc] 100 100 100 100 (5) 100 100
Maximum Load Current [Arms] 3 5 6 10 10 20
Minimum Load Current [Arms] 0 0 0 0 0 0
Maximum On-State Resistence [Ohm] (2) 0.20 .10 .040 .018 .010 .0033
Maximum Surge Current (10msec) [Apk] 30 60 100 100 100 200
Maximum On-State Voltage Drop @ Rated Current [VDC] 0.6 0.5 0.24 0.18 0.1 0.1
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range 3.0-10.0 VDC
Must Turn On Voltage 3.0 VDC
Must Turn Off Voltage 1 .0 VDC
Typycal Input Current @ 5 VDC 15 mAdc
Nominal Input Impedance 300 Ohm
Maximum Turn-On Time [msec] 1.0
Maximum Turn-Off Time [µsec] 300
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz)(3) 2500 Vrms
Minimum Insulation Resistance (@ 500 VDC)(3)
10
9
Ohm
Maximum Capacitance, Input/Output 15 pF
Ambient Operating Temperature Range -30 to 80°C
Ambient Storage Temperature Range -30 to 125°C
Weight (typical) 0.4 oz. (11g)
Encapsulation Thermally Conductive Epoxy
1) All parameters at 25°C unless otherwise specified.
2) @ rated current (RDS-ON)
3) Di electric and ins ulation resistance are measured between i nput and output
4) Inductive loads should be diode suppressed
5
)
At 55 Vdc