Datasheet

EL Series
• Ratings of 5A and 10A @ 3-100 VDC
• UL Recognized, CE and RoHS Compliant
• 5, 12 and 24VDC control
• Mosfet Output
PRODUCT SELECTION
Control Voltage 5A 10A
4-8 VDC EL100D5-05 EL100D10-05
10-14 VDC EL100D5-12 EL100D10-12
21-27 VDC EL100D5-24 EL100D10-24
OUTPUT SPECIFICATIONS (1)(3)
Description 5A 10A
Operating Voltage Range [VDC] 3-100 3-100
Maximum Load Current [Adc] (2) 5 10
Minimum Load Current [mAdc] 150 150
Transient Overvoltage [Vpk] 600 600
Maximum Surge Current Non-Repetitive (10ms) [A] 115/120 145/150
Maximum I² t for Fusing (50/60Hz, 1/2 cycle) [A² sec] 65/60 100/95
Maximum Off-State Leakage Current @ Rated Voltage [µAdc] 100 100
Maximum On-State Resistance @ Rated Current (Rds-on) 0.04 Ohm 0.01 Ohm
Maximum On-State Voltage Drop @ Rated Current 0.2V 0.1V
INPUT SPECIFICATIONS (1)
Description EL100Dxx-05 EL100Dxx-12 EL100Dxx-24
Control Voltage Range 4-8 VDC 10-14 VDC 21-27 VDC
Minimum Turn-On Voltage 4.0 VDC 10 VDC 21 VDC
Minimum Turn-Off Voltage 0.5 VDC 1.0 VDC 2 VDC
Typical Input Current @ nominal turn-on voltage 13.3 mA 11.7 mA 11.5 mA
Nominal Input Impedance [Ohms] 300 940 2K
Maximum Turn-On Time [msec] 1 1 1
Maximum Turn-Off Time [µsec] 300 300 300
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input to Output 2500 Vrms
Dielectric Strength, Output to Baseplate 2500 Vrms
Ambient Operating Temperature Range -30 to 80 °C
Ambient Storage Temperature Range -30 to 125 °C
Weight (typical) 0.5 oz (14.4g)
Terminals 3/16" input, 1/4" output QC
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) When mounted to the proper size heat sink (see derating curves)
3) Inductive loads should be diode suppressed to prevent damage to the relay.