Installation guide

WF200 802.11g Wireless Router

z ITU-T G.992.2 (G.lite)

z G.994.1 (G.hs, Multimode)

z ITU-T G.992.3 (ADSL2 G.dmt.bis)

z ITU-T G.992.4 (ADSL2 G.lite.bis)

z ITU-T G.992.5 (ADSL2+; Annex A, B, I, J, L & M)

z Reach Extended ADSL (RE ADSL)

 Quick Setup Wizard

Support Quick Setup Wizard Web GUI and Easy setup software to install this Wireless ADSL2+ router

easily and quickly.

 Multi-connection protocol support

z Multi Protocol over AAL5 (RFC1483 / 2684)

z Classical IP over ATM (RFC 1577)

z VC and LLC Multiplexing

z PPP over Ethernet (RFC 2516)

z PPP over ATM (RFC 2364)

z Supports OAM F4/F5 loop-back, AIS and RDI OAM cells.

z ATM Forum UNI 3.1/4.0 PVC

z Support up to 8PVCs.

z Traffic Shaping (ATM QoS) UBR, CBR, VBR-rt, VBR-nrt

 Network Address Translation (NAT)

Network Address Translation (NAT) allows the translation of an Internet protocol address used within

one network (for example a private IP address used in a local network) to a different IP address known

within another network (for example a public IP address used on the Internet).

 Universal Plug and Play (UPnP)

Universal Plug and Play is a standard that uses Internet and Web protocols to enable devices such as

PCs, peripherals, intelligent appliances, and wireless devices to be plugged into a network and

automatically know about each other.

This protocol is used to enable simple and robust connectivity

among stand-alone devices and PCs.

 Dynamic DNS Support

With Dynamic DNS support, you can have a static hostname alias for a dynamic IP address, allowing

the host to be more easily accessible from various locations on the Internet. You must register for this

service with a Dynamic DNS client.

 DHCP Support

DHCP (Dynamic Host Configuration Protocol) allows individual clients to obtain TCP/IP

configuration at start-up from a centralized DHCP server. The ADSL router has built-in DHCP server

capability enabled by default. It can assign IP addresses, an IP default gateway and DNS servers to

DHCP clients. It can also act as a surrogate DHCP server (DHCP Relay) where it relays IP address

assignment from the actual real DHCP server to the clients.

 Device Management