WIRELESS AMPLIFIERS TR - 100, TR - 60 www.crystal-acoustics.
ATTENTION Please read this booket carefully so that you get the best performance from this product and so that you become familiar with the functions of this device. This manual cannot be reproduced by any other person or company and these instructions are subject to change without warning due to continuous imporovement of our products.
I NTRO D U C TIO N GUARANTEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . 5 TR - 100 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 INSTALLATION OF APPLIANCES . . . . . . . . . . . . . . . . . . . .
GUA RA N TE E These Crystal Acoustics systems have been manufactured and tested using stateof-the-art manufacturing techniques. The manufacturer provides a two year guarantee. The guarantee excludes damage caused by improper use, water, lightning, and large scale catastrophes. E.U.
IMPORTANT SAFETY INSTRUCTIONS ATTENTION Please read this booklet carefully so that you get the best performance from this product and so that you become familiar with the functions of this device. This manual cannot be reproduced by any other person or company and these instructions are subject to change without warning due to continuous improvement of our products. 1. WARNING: Before commencing installation, always ensure all products are disconnected from the mains 2.
TR-100 TR-100 is a set of wireless amplifiers comprised of one transmitter and two separate receivers with amplifiers. SPECI FIC A TIO N S Transmitter (T-100m) Receiver – Amplifier (R-100W) Transmission/Reception Frequency 2,4GHz (ISM Band) 2,4GHz (ISM Band) Channels 4 auto selection 4 auto selection Frequency Response 20Ηz – 20kΗz 20Ηz – 20kΗz Noise to Signal > - 87db > - 87db Channel Separation > - 95dB > - 95dB Sampling 48 kHz 48 kHz A/D Conversion 16 bit 16 bit T.H.D.
PACKAGE CONTENTS The TR-100 package includes: 1. One T-100 wireless transmitter 2. Two R-100W wireless receivers with amplifier 3. Two pieces of 3.3ft speaker cable 4. One piece of 5ft RCA to RCA cable 5. One piece of 5ft RCA to Mini JACK cable 6.
INSTALLATION OF APPLIANCES Begin the installation of the T-100 transmitter as per the instructions in the manual: 1. In the packing you will find a double RCA cable. Carefully connect the RCA cable to the PRE OUT output on your amplifier. Then carefully connect the other end of the RCA cable to the LOW INPUT on the T-100 2. If your amplifier does not have a PRE OUT then connect the two cables for speakers in the HI INPUT inputs of the T-100 3. Connect the power cable to the mains 4.
OPERATION OF APPLIANCE The TR-100 system is activated by the On/Off switch at the back of the T-100. The R-100Ws are activated automatically. TROUBLESHOOTING The power indicator doesn’t light up on the T-100: 1. Check that the power cable is in the socket 2. Check that all cables are properly connected according to this instruction manual 3. Check that the On/Off switch is turned on The power indicator doesn’t light up on the R-100W: 1.
TR - 60 TR-60 is a set of wireless amplifiers comprised of one transmitter and one receiver with stereo amplifier. SPECI FIC A TIO N S ΠΟΜΠΟΣ (T-100m) ΔΕΚΤΗΣ – ΕΝΙΣΧΥΤΗΣ (R-60W) Transmission/Reception Frequency 2,4GHz (ISM Band) 2,4GHz (ISM Band) Channels 4 auto selection 4 auto selection Frequency Response 20Ηz – 20kΗz 20Ηz – 20kΗz Noise to Signal > - 87db > - 87db Channel Separation > - 95db > - 95db Sampling 48 kHz 48 kHz A/D Conversion 16 bit 16 bit T.H.D.
PACKAGE CONTENTS The TR-60 package includes: 1. One T-100m wireless transmitter 2. One R-60W wireless receiver with stereo amplifier 3. One piece of 3.3ft speaker cable 4. One piece of 10ft speaker cable 5. One piece of 5ft RCA to RCA cable 6. One piece of 5ft RCA to mini jack cable 7.
INSTALLATION OF APPLIANCES Begin the installation of the T-100 transmitter as per the instructions in the manual: 1. In the packing you will find a double RCA cable. Carefully connect the RCA cable to the PRE OUT output on your amplifier. Then carefully connect the other end of the RCA cable to the LOW INPUT on the T-100. 2. If your amplifier does not have a PRE OUT then connect the T-100 in the HI INPUT inputs using a speaker cable. 3. Connect the power cable to the mains. 4.
OPERATION OF APPLIANCE The TR-60 system is activated by the On/Off switch on the T-100. The R-60W is activated automatically. TROUBLESHOOTING The power indicator doesn’t light up on the T-100: 1. Check that the power cable is in the socket 2. Check that all cables are properly connected according to this instruction manual 3. Check that the On/Off switch is turned on The power indicator doesn’t light up on the R-60W: 1.
Infrared wave, Digital Transmission Digital Transmission analogue signal Bluetooth systems RF technology Analogue Transmission AV Sender Class leading Crystal Acoustics speaker, awarded by the biggest magazines in UK and US For supreme sound quality use Crystal Acoustics loudspeakers which have received awarded by the biggest magazines in UK, USA and other countries. The Best Gear to Buy Right Now’ by the largest USA magazine ‘Sound & Vision’.
Tel.: +30210 6134767 www.crystal-acoustics.com info@crystal-acoustics.