User's Manual

11
12
4. The receiver can be powered by both the V-mount battery and DC-IN port via
the affiliated power adapter. If the mentioned two types of power supply are
connected at the same time, the lithium battery is prioritized in power supplying,
and the battery will switch to the power adapter for power supplying automatically
after the battery power is exhausted.
This system supports tally function. When the receiver is activated by low-level
current, the transmitter will output high-level current signal.
Product Application
Point-to-Point mode
锂电池
Li-battery
Power
Live Streaming network
Switch Console
Camera-1
TX-1
Camera-2
TX-2
700m/2295ft
Dual-channel
Full-HD in One
RF Channel
RX-1
*2-channel
HDMI/SDI
*Tally
*RS232/422
In point-to-point mode, the 2 channel video sources are sent to the 2 channel
transmitters via HDMI or SDI. The receiver will receive the 2 channel signals
and display them to the display device via HDMI and SDI.