User's Manual

13
14
RESET
CH 2
L1
VIDEO
TX:7060
Transmitter ID
Two transmitters are numbered 1, 2,
respectively
Gain Mode
L
Low-gain mode
Blank
Signal Icon
X
Signal bar
Successful network connection
Video
No video signal input
VIDEO
WPS
In code matching status
Video signal input connected
Reset
The device is resetting and rebooting
CH*
OLED Display Description
Transmitter ID
Gain Mode
Signal Icon
Reset & Reboot
Video
Icon
Content
Status
Reset & Reboot
Frequency Channel
Frequency Channel
Numbers 1~2
Blank
High-gain mode
Connecting
Display current frequency channel (1~11)
Streaming mode
Camera-1
TX-1
Camera-2
TX-2
700m/2295ft
Dual-channel
Full-HD in One
RF Channel
RX-1
In streaming mode, the 2 channel video sources are sent to the 2 channel
transmitters via HDMI or SDI. The receiver will receive the RTSP protocol
network signals from the 2 channel transmitters and send them to the
embedded switch console for display through the network port.
You can connect to the WiFi at the receiver via your mobile phone or tablet,
and watch it through the player on the mobile phone or tablet.
Switch Console
RJ45
PC
Monitoring on Mobile Devices