SWIFT Z 5.
Product Overview Thank you for purchasing our wireless video monitor. The product is a set of touch-screen monitors with a built-in wireless receiver and a built-in wireless transmitter, respectively. The highest resolution of wireless transmission is 1080P/60Hz, using 2*2dBi antenna technology and H.264 encoding and decoding technology for professional image processing, clearer image and lower delay.
CAUTION ● This product should not be exposed dripping or splashing. ● Please place the wireless monitor on a flat with hard and stable surface. ● In order to reduce the risk of electric shock of fire, please do not expose the receiver/ transmitter to rain or moisture. ● Please avoid the heavy impact and drop onto the ground when move the product. ● The screen of this product is made of glass. Please do not drop the screen towards the ground. Keep away from injury if the screen is broken.
Special Notice ● The impact of radio waves (such as the following environment may cause the abnormal audio and video (blocked image, noise...etc.). 1) Transmit near the wall which is hard for the radio waves to get through. 2) Quite close to the refrigerator, metal fitment and appliances, or net to the crowded situation. ● This product has been tested and manufactured to comply with national electrical safety rules, however, there will be noise caused by the interference with other machines in rare cased.
● Both the transmitter (TX) and receiver (RX) support HDMI IN and HDMI OUT interface (same screen display). ●Support the opening and closing function of the wireless transmission module, which can be used as a monitor alone or as an integrated wireless monitor. ● 5.5 inches 1920x1080 full HD IPS screen, touch screen menu operation ● Support 3D LUT Log to REC.
CONTENTS 1. Product Description ----------------------------------------- 6 1.1 Button Instruction --------------------------------------------- 7 1.2 Port Instruction (bottom) ------------------------------------ 7 1.3 Port Instruction (right) --------------------------------------- 8 1.4 Power Supply Way ------------------------------------------- 9 1.5 Mount Points --------------------------------------------------- 9 1.6 Sunshade ------------------------------------------------------ 10 2.
1.
1.1 Button Instruction : Long press to turn on and off the power; short press to turn on and off the screen touch function MENU: Long press to open the main menu and short press to open the shortcut menu. Rotate the wheel to select a menu item, press it again to open the corresponding menu function. (See details: 2.Menu Operation Instruction) 1.
Barrel output for powering your camera with a separately available DC coupler via adaptor (NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic). More adapters coming soon. 1.3 Port Instruction (Right) TX: Transmitter RX: Receiver HDMI IN: 1.4, HDMI signal input HDMI OUT: 1.4, HDMI signal output DC IN 12V: DC power input, polarity as the input power : 3.
1.4 Power Supply Way (1) The rear cover of the monitor is equipped with F970 dual battery plates, which is applicable to F970 series of batteries. ● Sony F970 battery plate for battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 QM91D QM91 QM90D QM90 QM71D QM71 QM70D QM70 QM51D QM51 FM71 FM70 series ●Battery switching instruction When the two battery plates are installed with batteries, the upper right corner of the monitor will display the battery level.
1.6 Sunshade ① Sunshade ② Sunshade Frame ③ Fixed Frame ④ Sunshade Application First lock the Sunshade Frame ②with the monitor tight ③. Open the sunshade ①, and match the sticker on the sunshade inside to the marked part of the sunshade frame ②, smooth and press 3 sides on the sunshade, and then complete the sunshade installation ④.
2. Menu Operation Instruction After the monitor is properly connected to the power supply, the indicator light is on (red). Press button to turn on the monitor power. The indicator light turns yellow. After inputting the HDMI signal, the indicator light turns from yellow to green. After startup, short press to select to turn the screen touch function on or off.
①.Double-click on the screen to open the main menu (on the left side of the screen) and click on the corresponding menu to display the secondary menu. You can enter the corresponding function option to select or set with the "<" or ">" key of the option. Exit the menu and press key of the main menu or click the touch screen. ②.Swipe up from the bottom of the screen to open the shortcut menu and click on the corresponding menu to open or set the corresponding function.
(2) Menu Operation of MENU Wheel ①.When the menu is not displayed, directly rotate the wheel to backlight or brightness adjustment. The wheel option can be set to backlight or brightness in the menu . ②.Long press the MENU wheel to open the main menu (on the left side of the screen). Rotate the wheel to select the secondary function menu. After selecting it, press the wheel, then rotate the wheel to select or set the option function.
3. Menu Function Instruction All Waves OFF, ON Parada OFF, RGB, YUV, Y Vector OFF, ON Histogram OFF, ON OFF, ON Focus Assist The focus level and focus color items are displayed after the focus assist is turned on. Focus Level 1~10 Focus Color yellow, red, green, blue, white Audio Meter OFF, ON OFF, ON Zebra The zebra value item is displayed only after the zebra is turned on.
Nine Grid Safety Marker Center Marker OFF, ON OFF, 70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1 OFF, ON OFF, 16:9, 16:10, 4:3, 1.85:1, 2.35:1 Marker Mat The Marker Mat Alpha item is displayed after the Marker Mat is turned on. Marker Mat Alpha 0%, 25%, 50%, 75% Marker Color Return yellow, red, green, blue, white, black Please use the scroll wheel to return to the previous menu or click on the main menu directly Scan Mode Under Scan, Over Scan auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.
HDR OFF, HLG 2020, HLG 709, HLG P3 OFF, ON Lut Switch The Lut item is displayed after the Lut Switch is turned on. Lut SLOG2, SLOG3, LOGC, VLOG After copying the 3D LUT file to the U disk and Lut Import (Type-C) inserting it into the Type-C to USB connector, you can click the “<” or “>” key in the Lut Import(Type C) to import the 3D LUT file or rotate the wheel to import the 3D LUT file(up to 50 Luts).
Backlight, Volume After selecting the wheel option, you can click the Wheel “<” or “>” button in the wheel option, or rotate the wheel to select one of the shortcut keys to set it to the rotary wheel adjustment (when the menu is not displayed).
Exit the menu 4.Technical Parameters Panel Size 5.5” touch screen Resolution 1920 × 1080 pixels Frequency 5.1~5.9(GHz) Audio Format PCM System Latency 70ms Video Compression Format H.264 Transmission 250m/800ft (open environment) Distance Antenna Mode 2dBi x 2 Dot Pitch 0.0639 (H) × 0.
Power Out DC OUT 8V, Barrel (5.5mm outer, 2.1mm inner; Power DSLR or mirrorless camera) Wireless Transmission Opening 480P,576I,576P,720P60/59.94/50,1080I50/59.94/60 1080p23.98/24/25/29.97/30/50/59.97/60 HDMI Input/ Output Support Format Wireless Transmission Closing 480P,576I,576P,720P60/59.94/50,1080I50/59.94/60 1080p23.98/24/25/29.97/30/50/59.97/60 4K UHD 3840×2160p (30/29.97/25/24/23.
5. Trouble Shooting 5.1 Only black and white or monochrome image: ① please check saturation, brightness & contrast adjustment. ② Please check "Monochrome" is in black, white or monochrome image or other condition. 5.2 NO Image after power on ① Check if signal cable connecting is in good condition. ② Check signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged. 5.