Full Product Manual

10
III. Camera
1. The camera comes with two major parts; the
camera and the power adapter.
2. Please note that the camera cable has two
ends: one for the power cable and the other
has the Reset button inside.
3. Please make sure all the connections are tight
as possible and it is recommended that you
secure the connection with electrical tape as
you see t.
4. Use the included extension power cable(15
ft) if necessary. You may connect up to four
extension cables(60 ft).
1. If you did not get the picture on the screen,
the rst thing you should check is the power.
2. Please make sure that all the connections are
tight. If you are using the extension power
cable, please remove it and plug the camera
directly into the power adapter.
3. Make sure that you are using the correct pow-
er adapter(12V 1A).
4. Please try to cover the Light Sensor(use your
thumb for example) and see if the IR Lights
come on.
5. Try with the other power adapter from a
working camera. If the camera is working with
the other power adapter, the power adapter
is at fault and needs to be replaced. If you did
not see the IR lights come on, the camera may
need to be replaced.
1. General Description
2. Basic Troubleshooting
Please try to protect your power source from
moisture and other foreign elements.
3MP Camera (CVT-30WB)
15ft Power Extension Cable