Full Product Manual

IV. NVR (Main Unit)

1. The NVR is the main unit that stores recording and enables you to control the settings.

2. Please make sure all the connections are tight as possible and it is recommended that have the unit

be protected from the surge with a surge protector or UPS (Uninterrupted Power Supply).

3. We recommend turning the monitor off when not in use for a longer lifetime. If you need to monitor

24/7, please make use of an external monitor. (NVR with Built-in Monitor Models)

4. When powering up the NVR, make sure that

the Power Indicator Light on the NVR is solid

Red and the HDD Indicator is blinking Green

indicating hard drive activity.

5. Please check the power adapter’s Power

Indicator light. This should be solid. If it is

blinking or dimming, stop using the power

adapter immediately. A faulty power adapt-

er can damage your NVR system and cause a

re. Please replace the power adapter with the

appropriate power supply with the following

power output.

Power Supply Output: 12V3A - 5A

1. General Description

Please try to use a surge protector or UPS

(Uninterrupted Power Supply).

NVR with Built-in Monitor

12v 3A NVR Power Adapter

NVR